Publications
論文・発表等

Peer-Reviewed Journals (Representative) 査読付き学術論文(代表)

  1. Muhammad Usman, Shuo Cheng, Sasipa Boonyubol, Muhammad Aziz, Jeffrey S. Cross. Socio and techno-economic analyses of biodiesel production from sewage sludge in Tokyo, Japan. Journal of Cleaner Production, in press.
  2. Ibnu F. Kurniawan, Fei He, Iswan Dunggio, Marini S. Hamidun, Zulham Sirajuddin, Muhammad Aziz, A. Taufiq Asyhari. Imbalanced Learning of Remotely Sensed Data for Bioenergy Source Identification in Wallacea Forests of Indonesia. International Journal of Remote Sensing and Remote Sensing Letters, in press.
  3. Asep Bayu Dani Nandiyanto, Risti Ragadhita, Siti Nur Hofifah, Dwi Fitria Al Husaeni, Dwi Novia Al Husaeni, Meli Fiandini, Senny Luckiardi, Eddy Soeryanto, Soegoto, Arif Darmawan, Muhammad Aziz. Progress in the utilization of water hyacinth as effective biomass material. Environment, Development and Sustainability, in press. DOI: 10.1007/s10668-023-03655-6 (corresponding author)
  4. Iksan Riva Nanda, Nugroho Agung Pambudi, Muhammad Aziz. Review on the progress of solar water heaters and their future perspectives. Energy Technology, 2300191, 2023 () in press. DOI: 10.1002/ente.202300191 (corresponding author)
  5. Muhammad Zuhaib Akram, Yangbo Deng, Muhammad Aziz, Fanhua Ma, Anas Rao, Umair Sultan. Comparative study of NH3 and H2 impacts on combustion and emission characteristics of n-Hexadecane under different flame conditions. International Journal of Hydrogen Energy, in press. DOI: 10.1016/j.ijhydene.2023.06.347
  6. Fairuz Milkiy Kuswa, Hanafi, Prabowo, Arif Darmawan, Muhammad Aziz, Hariana. Investigation of the combustion and ash deposition characteristics of oil palm waste biomasses. Biomass Conversion and Biorefinery, in press. Biomass Conversion and Biorefinery, in press. DOI: 10.1007/s13399-023-04418-z (corresponding author)
  7. Arif Darmawan, Taufiq Asyhari, Iswan Dunggio, Salmahaminati, Muhammad Aziz. Energy harvesting from tropical biomasses in Wallacea region: Scenarios, technologies, and perspectives. Biomass Conversion and Biorefinery, in press. DOI: 10.1007/s13399-023-04223-8 (corresponding author)
  8. Hariana, Feri Karuana, Prabowo, Edi Hilmawan, Arif Darmawan, Muhammad Aziz. Effects of different coals for co-combustion with palm oil waste on slagging and fouling aspects. Combustion Science and Technology, in press. DOI: 10.1080/00102202.2022.2152684.
  9. Asep Bayu Dani Nandiyanto, Risti Ragadhita, Meli Fiandini, Dwi Novia Al Husaeni, Muhammad Aziz. The Role of Iron Oxide in Hydrogen Production: Theory and Bibliometric Analyses. Moroccon Journal of Chemistry, 11 (4), 897-916, 2023 (Dec). DOI: 10.48317/IMIST.PRSM/morjchem-v11i04.41591.
  10. Muhammad Aziz, Firman Bagja Juangsa, Adrian Rizqi Irhamna, Achmad Rofi Irsyad, Hariana, Arif Darmawan. Ammonia utilization technology for thermal power generation: a review. Journal of the Energy Institute, 111, 101365, 2023 (Dec). DOI: 10.1016/j.joei.2023.101365 (corresponding author)
  11. A. B. D. Nandiyanto, R. Ragadhita, M. Fiandini, D. N. Al Husaeni, M. Aziz. The role of iron oxide in hydrogen production: Theory and bibliometric analyses. Moroccan Journal of Chemistry 11 (4), 897-916, 2023 (Dec). DOI: 10.48317/IMIST.PRSM/morjchem-v11i04.41591
  12. Lia Putriyana, Yunus Daud, Muhammad Aziz, Nasruddin, Nurry Widya Hesty. Evaluation and ranking of the CO2 storage potential in low to medium temperature geothermal fields in Indonesia. Case Studies in Chemical and Environmental Engineering, 8, 100406, 2023 (Dec). DOI: 10.1016/j.cscee.2023.100406
  13. Zhuang Sun, Lu Ding, Po-Chih Kuo, Muhammad Aziz. Reaction kinetics study for temperature-programmed biomass chemical looping process: a mass balance based multi-step scheme. Fuel, 349, 128736, 2023 (Oct). DOI:  10.1016/j.fuel.2023.128736 (corresponding author)
  14. Suyatno, Adi Prismantoko, Hanafi Prida Putra, Nimas Mayang Sabrina, Arif Darmawan, Muhammad Aziz, Hafizh Ghazidin, Hariana. Assessment of potential tropical woody biomass for coal co-firing on slagging and fouling aspects. Thermal Science and Engineering Progress, 44, 102046, 2023 (Sep). DOI: 10.1016/j.tsep.2023.102046.
  15. Hariana, Hafizh Ghazidin, Arif Darmawan, Edi Hilmawan, Prabowo, Muhammad Aziz. Effect of additives to increase ash fusion temperature during co-firing of coal and palm oil waste biomass. Bioresource Technology Reports, 23, 101531, 2023 (Sep). DOI: 10.1016/j.biteb.2023.101531.
  16. Jing Wang, Lixia Kang, Yongzhong Liu, Muhammad Aziz. A multi-period design method for the steam and power systems coupling solar thermal energy and waste heat recovery in refineries. Journal of Cleaner Production, 416, 137934, 2023 (Sep). DOI: 10.1016/j.jclepro.2023.137934
  17. Asep Bayu Dani Nandiyanto, Risti Ragadhita, Muhammad Aziz. How to calculate and measure solution concentration using uv-vis spectrum analysis: Supporting measurement in the chemical decomposition, photocatalysis, phytoremediation, and adsorption process. Indonesian Journal of Science and Technology, 8(2), 345–362, 2023 (Sep). DOI: 10.17509/ijost.v8i2.57783.
  18. Muhammed Zafar Ali Khan, Haider Ali Khan, Sai Sudarshan Ravi, James Turner, Muhammad Aziz. Potential of Clean liquid Fuels in Decarbonizing Transportation – An Overlooked Net- Zero Pathway?. Renewable and Sustainable Energy Reviews, 183, 113483, 2023 (Sep). (corresponding author)
  19. Chenxi Lu, Adhy Lesamana, Fei Chen, Luthfan Muhammad Aziz. MD-TPMS: Multi-dimensional gradient minimal surface generator. Software Impacts, 17, 100527, 2023 (Sep). DOI: 10.1016/j.simpa.2023.100527 (corresponding author)
  20. Du Wen, Muhammad Aziz.Data-driven energy management system for flexible operation of hydrogen/ammonia-based energy hub: A deep reinforcement learning approach. Energy Conversion and Management, 291, 117323, 2023 (Sep). DOI: 10.1016/j.enconman.2023.117323 (corresponding author)
  21. Ahmad Naquash, Amjad Riaz, Muhammad Abdul Qyyum, Muhammad Aziz, Ehsanolah Assareh, Moonyong Lee. Liquid hydrogen storage and regasification process integrated with LNG, NGL, and liquid helium production. Renewable Energy, 213, 165-175, 2023 (Sep). DOI: 10.1016/j.renene.2023.05.122.
  22. Hariana Hariana; Moch Zulfikar Eka Prayoga; Edi Hilmawan; Arif Darmawan; Muhammad Aziz; Prabowo Prabowo. Combining experimental and analytical methods to evaluate coal co-firing with sorghum waste. Journal of Thermal Analysis and Calorimetry, 148, 6347-6369, 2023 (Jul). DOI: 10.1007/s10973-023-12153-w
  23. Wei Wu, Yan-Ting Lin, Po-Hsuan Liao, Muhammad Aziz, Po-Chih Kuo. Prediction of CO-NOx emissions from a natural gas power plant using proper machine learning models. Energy Technology, 11(7), 2300041, 2023 (Jul). DOI: 10.1002/ente.202300041
  24. Muhammad Zafran Raja Mohammed, Zi Wei Ng, Aditya Putranto, Zong Yang Kong, Jaka Sunarso, Muhammad Aziz, Sharif Hussein Sharif Zein. Process design, simulation, and techno-economic analysis of integrated production of furfural and glucose derived from Malaysian empty fruit bunches. Clean Technologies and Environmental Policy, 25, 1551-1567, 2023 (Jul). DOI: 10.1007/s10098-022-02454-3
  25. Luthfan Adhy Lesmana, Chenxi Lu, Fei Chen, Muhammad Aziz. Triply Periodic Minimal Surface Gyroid Structure as Effective Metal Hydride Hydrogen Storage Reactor: Experimental Study. Thermal Science and Engineering Progress, 42, 101903, 2023 (Jul). DOI: 10.1016/j.tsep.2023.101903
  26. Po-Chih Kuo, Biju Illathukandy, Zhuang Sun, Muhammad Aziz. Efficient conversion of waste-to-SNG via hybrid renewable energy systems for circular economy: Process design, energy, and environmental analysis. Waste Management, 166, 1-12, 2023 (Jul). DOI: 10.1016/j.wasman.2023.04.041
  27. Hariana, Prabowo, Edi Hilmawan, Fairuz Milky Kuswa, Arif Darmawan, Muhammad Aziz. A comprehensive evaluation of cofiring biomass with coal and slagging-fouling tendency in pulverized coal-fired boilers. Ain Shams Engineering Journal, 14(7), 102001, 2023 (Jul). DOI: 10.1016/j.asej.2022.102001
  28. Sai Sudharshan Ravi, Chris Brace, Charles Larkin, Muhammad Aziz, Felix Leach, James Turner. On the Pursuit of Emissions-free Clean Mobility – Electric Vehicles versus E-Fuels. Science of the Total Environment, 875, 162688, 2023 (Jun). DOI: 10.1016/j.scitotenv.2023.162688
  29. Po-Chih Kuo, Zhuang Sun, Faruk Özdemir, Wei Wu, Muhammad Aziz. CO2 utilization in chemical looping gasification and co-gasification of lignocellulosic biomass components over iron-based oxygen carriers: Thermogravimetric behavior, synergistic effect, and reduction characteristics. Journal of Environmental Chemical Engineering, 11 (3), 109971, 2023 (Jun). DOI: 10.1016/j.jece.2023.109971
  30. Jinyue Cui, Muhammad Aziz. Techno-economic analysis of hydrogen transportation infrastructure using ammonia and methanol. International Journal of Hydrogen Energy, 48, 15737-15747, 2023 (May). DOI: 10.1016/j.ijhydene.2023.01.096
  31. Hariana, Hafizh Ghazidin, Hanafi Prida Putra, Arif Darmawan, Prabowo, Edi Hilmawan, Muhammad Aziz. The effects of additives on deposit formation during co-firing of high-sodium coal with high-potassium and -chlorine biomass. Energy, 271, 127096, 2023 (May). DOI: 10.1016/j.energy.2023.127096
  32. Hariana, Adi Prismantoko, Prabowo, Edi Hilmawan, Arif Darmawan, Muhammad Aziz. Effectiveness of different additives on slagging fouling tendency of blended coal. Journal of Energy Institute, 107, 101192, 2023 (Apr). DOI: 10.1016/j.joei.2023.101192
  33. Hariana, Hanafi Prida Putra, Prabowo, Edi Hilmawan, Arif Darmawan, Keiichi Mochida, Muhammad Aziz. Theoretical and experimental investigation of ash-related problems during coal co-firing with different types of biomass waste in a pulverized coal-fired boiler. Energy, 269, 126784, 2023 (Apr). DOI: 10.1016/j.energy.2023.126784.
  34. M. Zuhaib Akram, Fanhua Ma, Muhammad Aziz, Yangbo Deng, Han Wu, Xiaoqing You. Theoretical study of H2 impact on combustion and emission characteristics of gasoline and diesel surrogates. Fuel, 338, 127321, 2023 (Apr). DOI: 10.1016/j.fuel.2022.127321
  35. Zhuang Sun, Po-Chih Kuo, Lu Ding, Muhammad Aziz.  Enhanced decomposition of biomass tar using low concentration copper doped hematite in direct chemical looping process. Fuel Processing Technology, 241, 107601, 2023 (Mar). DOI: 10.1016/j.fuproc.2022.107601
  36. Kim Leong Liaw, Jundika C. Kurnia, Zulfan A Putra, Muhammad Aziz, Agus P Sasmito. Enhanced turbulent convective heat transfer in helical twisted multilobe tubes. International Journal of Heat and Mass Transfer, 202, 123687, 2023 (Mar). DOI: 10.1016/j.ijheatmasstransfer.2022.123687
  37. Du Wen, Shicheng Liu, Zhiyuan Ning, Muhammad Aziz. Techno-economic evaluation of hydrogen and ammonia as energy carriers in multigeneration systems. Energy Conversion and Management, 277, 116670, 2023 (Feb). DOI: 10.1016/j.enconman.2023.116670
  38. Luthfan Adhy Lesmana, Muhammad Aziz. Adoption of Triply Periodic Minimal Surface Structure Toward Effective Metal Hydride-Based Hydrogen Storage. Energy 262, 125399, 2023 (Jan). DOI: 10.1016/j.energy.2022.125399
  39. Robby Dwianto Widyantara, Siti Zulaikah, Firman Bagja Juangsa, Bentang Arief Budiman, Muhammad Aziz. Review on Battery Packing Design Strategies for Superior Thermal Management in Electric Vehicles. Batteries, 8(12), 287, 2022 (Dec). DOI: 10.3390/batteries8120287
  40. Obie Farobie, Latifa Aisya Anis, Widya Fatriasari, Azizatul Karimah, Puji Rahmawati Nurcahyani, Delicia Yunita Rahman, Ayu Lana Nafisyah, Apip Amrullah, Muhammad Aziz. Simultaneous production of nutritional compounds and hdyrochar from Chlorella pyrenoidosa via hydrothermal process, Bioresource Technology Reports, 20, 101245, 2022 (Dec). DOI: 10.1016/j.biteb.2022.101245.
  41. Xinxin Liu, Shuoshuo Li, Liang Liu, Chao He, Zhuang Sun, Faruk Özdemir, Muhammad Aziz, Po-Chih Kuo. Research progress on convective heat transfer characteristics of supercritical fluids in curved tube. Energies, 15 (22), 8358, 2022 (Nov). DOI: 10.3390/en15228358.
  42. Chenxi Lu, Yufeng Zhang, Muhammad Aziz, Pin Wen, Chi Zhang, Qiang Shen, Fei Chen. Mechanical behaviors of multidimensional gradient gyroid structures under static and dynamic loading: A numerical and experimental study. Additive Manufacturing, 59, B, 103187, 2022 (Nov).
  43. Muhammed Zafar Ali Khan, Haider Ali Khan, Muhammad Aziz. Performance optimization of heat-exchanger with delta-wing tape inserts using machine learning. Applied Thermal Engineering, 216, 119135, 2022 (Nov). DOI: 10.1016/j.applthermaleng.2022.119135
  44. Kyohsuke Miyahira, Muhammad Aziz. Hydrogen and ammonia production from low-grade agricultural waste adopting chemical looping process. Journal of Cleaner Production,  372, 133827, 2022 (Oct). DOI: 10.1016/j.jclepro.2022.133827.
  45. Aditya Putranto, Zi Wei Ng, Tony Hadibarata, Muhammad Aziz, Jason Yi Juang Yeo, Suryadi Ismadji, Jaka Sunarso. Effects of pyrolysis temperature and impregnation ratio on adsorption kinetics and isotherm of methylene blue on corn cobs activated carbons. South African Journal of Chemical Engineering, 42, 91-97, 2022 (Oct). DOI: 10.1016/j.sajce.2022.07.008
  46. Zhuang Sun, Muhammad Aziz. Solar-assisted biomass chemical looping gasification in an indirect coupling: Principle and application. Applied Energy, 323, 119635, 2022 (Oct). DOI: 10.1016/j.apenergy.2022.119635
  47. Firman Bagja Juangsa, Axl Sabilirasyad Cezeliano, Prihadi Setyo Darmanto, Muhammad Aziz. Thermodynamic Analysis of Hydrogen-based Cement Production, South African Journal of Chemical Engineering, 42, 23-31, 2022 (Oct). DOI: 10.1016/j.sajce.2022.07.003
  48. Hafif Dafiqurrohman, Kania Amelia Safitri, M Ismail Bagus Setyawan, Adi Surjosatyo, Muhammad Aziz. Gasification of rice wastes toward green and sustainable energy production: a review. Journal of Cleaner Production, 366, 132926, 2022 (Sep). DOI: 10.1016/j.jclepro.2022.132926
  49. Du Wen, Muhammad Aziz. Techno-economic analyses of power-to-ammonia-to-power and biomass-to-ammonia-to-power pathways for carbon neutrality scenario. Applied Energy, 319, 119272, 2022 (Aug). DOI: 10.1016/j.apenergy.2022.119272 (corresponding author)
  50. Bentang Arief Budiman, Andy Saputro, Samuel Rahardian, Poetro Lebdo Sambegoro, Ignatius Pulung Nurprasetio, Muhammad Aziz. Mechanical damages in solid electrolyte battery due to electrode volume changes. Journal of Energy Storage, 52, 104810, 2022 (Aug). DOI: 10.1016/j.est.2022.104810
  51. Sai Sudharshan Ravi, Muhammad Aziz. Clean hydrogen for mobility – Quo vadis?. International Journal of Hydrogen Energy, 47(47), 20632-20661, 2022 (Jun). DOI: 10.1016/j.ijhydene.2022.04.158
  52. Du Wen, Muhammad Aziz. Design and analysis of biomass-to-ammonia-to-power as an energy storage method in a renewable multi-generation system. Energy Conversion and Management, 261, 115611, 2022 (Jun). DOI: 10.1016/j.enconman.2022.115611
  53. Chanin Hakandai, Hari Sidik Pramono, Muhammad Aziz. Conversion of Municipal Solid Waste to Hydrogen and Its Storage to Methanol. Sustainable Energy Technologies and Assessments, 51, 101968, 2022 (Jun). DOI: 10.1016/j.seta.2022.101968.
  54. Muhammed Zafar Ali Khan, Haider Ali Khan, Muhammad Aziz. Harvesting the Energy from Ocean: Technologies and Prospectives. Energies, 15(9), 3456, 2022 (May). DOI: 10.3390/en15093456
  55. Ibham Veza, Mohd Azman Abas, Djati Wibowo Djamari, Noreffendy Tamaldin, Fitri Endrasari, Bentang Arief Budiman, Muhammad Idris, Anthony C. Opia, Firman Bagja Juangsa, Muhammad Aziz. Electric Vehicles in Malaysia and Indonesia: Opportunities and Challenges. Energies, 15, 2564, 2022 (Apr). DOI: 10.3390/en15072564
  56. Du Wen, Muhammad Aziz. Flexible operation strategy of an integrated renewable multi-generation system for electricity, hydrogen, ammonia, and heating. Energy Conversion and Management, 253, 115166, 2022 (Feb). DOI: 10.1016/j.enconman.2021.115166.
  57. Du Wen, Yuqing Pan, Xiaole Chen, Muhammad Aziz, Qulan Zhou, Na Li. Analysis and prediction of thermal stress distribution on the membrane wall in the arch-fired boiler based on machine learning technology. Thermal Science and Engineering Progress, 28, 101137, 2022 (Feb). DOI: 10.1016/j.tsep.2021.101137
  58. Zhuang Sun, Shukun Wang, Muhammad Aziz. Highly integrated system for ammonia and electricity production from biomass employing direct chemical looping: Exergy and exergoeconomic analyses. Energy Conversion and Management, 251, 115013, 2022 (Jan). DOI: 10.1016/j.enconman.2021.115013
  59. Robby Dwianto Widyantara, Muhammad Adnan Naufal, Poetro Lebdo Sambegoro, Ignatius Pulung Nurprasetio, Farid Triawan, Djati Wibowo Djamari, Asep Bayu Dani Nandiyanto, Bentang Arief Budiman, Muhammad Aziz. Low-cost air-cooling system optimization on battery pack of electric vehicle. Energies, 14 (23), 7954, 2021 (Dec). DOI: 10.3390/en14237954
  60. Christopher Fernaldy Kusuma, Bentang Arief Budiman, Ignatius Pulung Nurprasetio, Metha Islameka, Abdul Hakim Masyhur, Muhammad Aziz, Iman Kartolaksono Reksowardojo. Energy management system of electric bus equipped with regenerative braking and range extender. International Journal of Automation Technology, 22 (6), 1651-1664, 2021 (Dec). DOI:  10.1007/s12239–021–0142–z
  61. Kyohsuke Miyahira, Muhammad Aziz. Hydrogen Production from Low-Grade Agricultural Waste: Integrated Drying, Gasification, and Chemical Looping. Chemical Engineering Transactions, 88, 241-246, 2021 (Nov). DOI: 10.3303/CET2188039
  62. Luthfan Adhy Lesmana, Muhammad Aziz. Triply Periodic Minimal Surface-Based Heat Exchanger as Metal Hydride Hydrogen Storage Reactor. Chemical Engineering Transactions, 88, 229-234, 2021 (Nov). DOI: 10.3303/CET2188038
  63. Erlandy Dwinanto Toe, Winarto Kurniawan, Eden M. Andrews, Kiyohiko Nakasaki, Hirofumi Hinode, Muhammad Aziz. All-solid-state Z-scheme Plasmonic Si@Au Nanoparticles on CuBi2O4/BiVO4 for efficient photocatalytic activity. Advanced Powder Technology, 32(11), 4330-4342, 2021 (Nov). DOI: 10.1016/j.apt.2021.09.040
  64. Khasani, Willie Prasidha, Arif Widyatama, Muhammad Aziz. Energy-saving and environmentally-benign integrated ammonia production system. Energy, 235, 121400, 2021 (Nov). DOI: 10.1016/j.energy.2021.121400
  65. Aditya Harjon, Muhammad Aziz. Hydrogen energy economy in Asia-Pacific: a perspective review on techno-socio-economy nexus. International Journal of Hydrogen Energy, in press.
  66. Muhammad Aziz, Arif Darmawan, Firman Bagja Juangsa. Hydrogen production from biomasses and wastes: a technological review. International Journal of Hydrogen Energy, 46(71), 35027-35056, 2021 (Oct). DOI: 10.1016/j.ijhydene.2021.08.070.
  67. Zhuang Sun, Muhammad Aziz. Comparative thermodynamic and techno-economic assessment of green methanol production from biomass through direct chemical looping processes. Journal of Cleaner Production, 321, 129023, 2021 (Oct). DOI: 10.1016/j.jclepro.2021.129023
  68. Mohammed Zafar Ali Khan, Muhammad Aziz, Agung Tri Wijayanta. Heat Transfer Enhancement Prediction of Delta-Wing Tape Inserts Using Artificial Neural Network. Case Studied in Thermal Engineering, 27, 101322, 2021 (Oct). DOI: 10.1016/j.csite.2021.101322
  69. Arif Rahman, Juno Dwi Putra, Nining Betawati Prihantini, T.M.I. Mahlia, M. Aziz, Deendarlianto, N. Nasruddin. Cultivation of Synechococcus HS-9 in a novel rectangular bubble column photobioreactor with horizontal baffle. Case Studies in Thermal Engineering, 27, 101264, 2021 (Oct). DOI:  10.1016/j.csite.2021.10126
  70. Muhammad Aziz. Liquid hydrogen: Review on liquefaction, storage/transportation, and safety. Energies, 14(18), 5917, 2021 (Sep). DOI: 10.3390/en14185917
  71. Zhuang Sun, Muhammad Aziz. Thermodynamic analysis of biomass direct chemical looping combustion process based tri-generation system. Energy Conversion and Management, 244, 114517, 2021 (Sep). DOI: 10.1016/j.enconman.2021.114517
  72. Fazlur Rashid, Md. Emdadul Hoque, Muhammad Aziz, Md. Nazmus Shakib, Md. Tariqul Islam, Raihan Moker Robin. Techno-economic analysis of hybrid systems of energy in a rural area of Bangladesh. Energies, 14(18), 5794, 2021 (Sep). DOI: 10.3390/en14185794.
  73. Mirmanto, I Made Adi Sayoga, Agung Tri Wijayanta, Agus Pulung Sasmito, Muhammad Aziz. Enhancement of continuous-feed low-cost solar water distiller: Effects of various fin designs. Energies, 14(16), 4844, 2021 (Aug). DOI: 10.3390/en14164844.
  74. Yousef Abbaspour Gilandeh, Mohammad Kaveh, Hamideh Fatemi, Muhammad Aziz. Combined hot air, microwave and infrared drying of hawthorn fruit: Effects of ultrasonic pretreatment on drying time, energy, qualitative and bioactive compounds properties. Foods, 10(5), 1006, 2021 (May). DOI:  10.3390/foods10051006
  75. Firman Bagja Juangsa, Adrian Rizqi Irhamna, Muhammad Aziz. Production of ammonia as potential hydrogen carrier: Review on Thermochemical and Electrochemical Processes. International Journal of Hydrogen Energy, 46(27), 14455-14477, 2021 (Apr). DOI: 10.1016/j.ijhydene.2021.01.214.
  76. Md. Emdadul Hoque, Fazlur Rashid, Muhammad Aziz. Gasification and power generation characteristics of rice husk, sawdust, and coconut shell using a fixed-bed downdraft gasifier. Sustainability 13, 2027, 2021 (Feb). DOI: 10.3390/su13042027.
  77. Chandra Wahyu Purnomo, Winarto Kurniawan, Muhammad Aziz. Technological review on thermochemical conversion of COVID-19-related medical wastes. Resources, Conservation & Recycling 167, 105429, 2021 (Jan). DOI: 10.1016/j.resconrec.2021.105429.
  78. Arif Darmawan, Muhammad W. Ajiwibowo, Koji Tokimatsu, Muhammad Aziz. Efficient co-production of power and ammonia from black liquor. International Journal of Hydrogen Energy 45 (59), 34437-34448, 2020 (Dec). DOI: 10.1016/j.ijhydene.2020.02.196.
  79. Arif Darmawan, Baskoro Lokahita, Koji Tokimatsu, Muhammad Aziz. Direct ammonia production via combination of carbonization and thermochemical cycle from empty fruit bunch, Thermal Science and Engineering Progress, 20, 100673, 2020 (Dec). DOI: 10.1016/j.tsep.2020.100673.
  80. Firman Bagja Juangsa, Prihadi Setyo Darmanto, Muhammad Aziz. CO2-free power generation employing integrated ammonia decomposition and hydrogen combustion-based combined cycle, Thermal Science and Engineering Progress, 19, 100672, 2020 (Oct). DOI: 10.1016/j.tsep.2020.100672.
  81. Alvin Reynaldo, Hari Sidik Pramono, Sigit Puji Santosa, Muhammad Aziz. Finite element analysis of liquefied ammonia tank for mobility vehicles employing polymers and composites. Energies, 13(20), 5321, 2020 (Oct). DOI: 10.3390/en13205312.
  82. Yousef Abbaspour-Gilandeh, Mohammad Kaveh, Muhammad Aziz. Ultrasonic-microwave and infrared assisted convective drying of carrot: Drying kinetic, quality and energy consumption. Applied Sciences, 10(18), 6309, 2020 (Sep). DOI: 10.3390/app10186309
  83. Ebrahim Taghinezhad, Mohammad Kaveh, Muhammad Aziz. Effects of physical and chemical pretreatments on drying and quality properties of blackberry (Rubus spp.) in hot air dryer. Food Science & Nutrition, 8, 3843-3856, 2020 (Jul). DOI: 10.1002/fsn3.1678
  84. Siti Jamilatun, Budhijanto, Rochmadi, Muhammad Aziz, Arief Budiman. Catalytic pyrolysis of Spirulina platensis residue (SPR): Thermochemical behavior and kinetics. International Journal of Technology, 11(3), 522-531, 2020 (Jul). DOI: 10.14716/ijtech.v11i3.2967.
  85. Aditya Putranto, Muhammad Aziz. Mass transfer of adsorption of methylene blue into biomass-based activated carbons: heterogeneous surface diffusion model. Separation Science and Technology, 55(13), 2269-2280, 2020 (Jul). DOI: 10.1080/01496395.2019.1619766
  86. Muhammad Aziz, Agung Tri Wijayanta, Asep Bayu Dani Nandiyanto. Ammonia as effective hydrogen storage: Reviews on production, storage, and utilization. Energies, 13(12), 3062, 2020 (Jun). DOI: 10.3390/en13123062
  87. Agung Tri Wijayanta, Sastrorejo Mirmanto, Muhammad Aziz. Heat transfer augmentation of internal flow using twisted tape insert in turbulent-flow. Heat Transfer Engineering, 41(14), 1288-1300, 2020 (Jun). DOI:  10.1080/01457632.2019.1637149.
  88. Agung Tri Wijayanta, Indri Yaningsih, Wibawa Endra Juwana, Muhammad Aziz, Takahiko Miyazaki. Effect of wing-pitch ratio of double-sided delta-wing tape insert on the improvement of convective heat transfer. International Journal of Thermal Sciences, 151, 106261, 2020 (May). DOI: 10.1016/j.ijthermalsci.2020.106261
  89. Hery Tri Waloyo, Ubaidillah Ubaidillah, Dominicus Tjahjana, Muhammad Nizam, Muhammad Aziz. A novel approach on the unipolar axial type eddy current brake model considering the skin effect. Energies, 13(7), 1561, 2020 (Mar). DOI: 10.3390/en13071561.
  90. Muhammad Huda, Koji Tokimatsu, Muhammad Aziz. Techno-economic analysis of vehicle-to-grid (V2G) integration as distributed energy resources in Indonesia power system. Energies, 13, 1162, 2020 (Mar). DOI:10.3390/en13051162.
  91. Maekawa Takafumi, Takuya Oda, Muhammad Aziz, Watanabe Yoko, Takao Kashiwagi. Charging behaviors of electric vehicles based on charging necessity judgment model: Effects of base charging existence and battery capacity enlargement. IEEJ Transactions on Power and Energy, 139(11), 1357-1367, 2019 (Nov). DOI: 10.1541/ieejeiss.139.1357 (in Japanese)
  92. Muhammad W. Ajiwibowo, Arif Darmawan, Muhammad Aziz. Towards clean palm oil processing: Integrated ammonia production from empty fruit bunch and palm oil effluent. Journal of Cleaner Production, 236, 117680, 2019 (Nov). DOI: 10.​1016/​j.​jclepro.​2019.​117680  
  93. Arif Darmawan, Muhammad Ajiwibowo, Muhammad Kunta Biddinika, Koji Tokimatsu, Muhammad Aziz. Black liquor-based hydrogen and power co-production: Combination of supercritical water gasification and chemical looping. Applied Energy, 252, 113446, 2019 (Oct). DOI: 10.​1016/​j.​apenergy.​2019.​113446
  94. Anissa Nurdiawati, Ilman Nuran Zaini, Dwiwahju Sasongko, Muhammad Aziz. Novel configuration of supercritical water gasification and chemical looping for highly-efficient hydrogen production from microalgae. Renewable & Sustainable Energy Reviews, 112, 369-381, 2019 (Sep). DOI: 10.1016/j.rser.2019.05.054
  95. Agung Tri Wijayanta, Budi Kristiawan, Pranowo, Agung Premono, Muhammad Aziz. Computational fluid dynamics analysis of an enhanced tube with backward louvered strip insert. Energies, 12, 3370, 2019 (Sep). DOI: 10.3390/en12173370
  96. Rohit KSS Vuppala, Benitta A. Chaedir, Lishuai Jiang, Lianjun Chen, Muhammad Aziz, and Agus P. Sasmito. Optimization of membrane electrode assembly of PEM fuel cell by response surface method. Molecules, 24(17), 3097, 2019 (Aug). DOI: 10.3390/molecules24173097.
  97. Budi Kristiawan, Agung Tri Wijayanta, Koji Enoki, Takahiko Miyazaki, Muhammad Aziz. Heat transfer enhancement of TiO2/water nanofluids flowing inside a square minichannel with microfin structure: a numerical investigation. Energies, 12(16), 3041, 2019 (Aug). DOI: 10.3390/en12163041.
  98. Firman Bagja Juangsa, Muhammad Aziz. Integrated system of thermochemical cycle of ammonia, nitrogen production, and power generation. International Journal of Hydrogen Energy, 44, 17525-17534, 2019 (Jul). DOI: 10.1016/j.ijhydene.2019.05.110
  99. Budi Triyono, Pandji Prawisudha, Muhammad Aziz, Mardiyati, Ari Darmawan Pasek, Kunio Yshikawa. Utilization of mixed organic-plastic of municipal solid waste as renewable solid fuel employing wet torrefaction. Waste Management, 95, 1-9, 2019 (Jul). DOI: 10.1016/j.wasman.2019.05.055
  100. Agung Tri Wijayanta, Takuya Oda, Chandra Wahyu Purnomo,Takao Kashiwagi, Muhammad Aziz. Liquid hydrogen, methylcyclohexane, and ammonia as potential hydrogen storage: Comparison review. International Journal of Hydrogen Energy, 44, 15026-15044, 2019 (Jun). DOI: 10.1016/j.ijhydene.2019.04.112
  101. Anissa Nurdiawati, Ilman Nuran Zaini, Mohamad Amin, Muhammad Aziz. Microalgae-based coproduction of ammonia and power employing chemical looping process. Chemical Engineering Research and Design, 146, 311-323, 2019 (Jun). DOI: 10.1016/j.cherd.2019.04.013
  102. Muhammad Kunta Biddinika, Mochamad Syamsiro, Srikandi Novianti, Bakhtiyor Nakhshiniev, Muhammad Aziz, Fumitake Takahashi. Dissemination of technology information through YouTube: a case of renewable energy technology. TELKOMNIKA Telecommunication Computing Electronics and Control, 17(3), 1526-1538, 2019 (Jun). DOI: 10.12928/telkomnika.v17i3.10124
  103. Agung Tri Wijayanta, Muhammad Aziz. Ammonia production from algae via integrated hydrothermal gasification, chemical looping, N2 production, and NH3 synthesis. Energy, 174, 331-338, 2019 (May). DOI: 10.1016/j.energy.2019.02.190
  104. T. Kurniawan, M.A. Anwar, R. Oktiani, R. Ragadhita, A.B.D. Nandiyanto, M. Aziz. Influences of solvent types on the formation of graphene in the electrochemical exfoliation method. Materials Physics and Mechanics 42, 151-157, 2019 (Apr). DOI: 10.18720/MPM.4212019_13
  105. Muhammad W. Ajiwibowo, Arif Darmawan, Muhammad Aziz. A conceptual chemical looping combustion power system design in a power-to-gas energy storage scenario. International Journal of Hydrogen Energy, 44(19), 9636-9642, 2019 (Apr). DOI: 10.1016/j.ijhydene.2018.11.177
  106. Muhammad Aziz. Advanced green technologies toward future sustainable energy systems. Indonesian Journal of Science & Technology, 4(1), 89-96, 2019 (Apr). DOI: 10.17509/ijost.v4i1.15805
  107. Asep Bayu Dani Nandiyanto, Risti Ragadhita, Ade Gafar Abdullah, Farid Triawan, Gagus Ketut, Sunnardianto, Muhammad Aziz. Techno-economic feasibility study of low-cost and portable home-made spectrophotometer for analyzing solution concentration. Journal of Engineering Science and Technology, 14(2), 599-609, 2019 (Apr).
  108. Agung Tri Wijayanta, Pranowo, Mirmanto, Budi Kristiawan, Muhammad Aziz. Internal flow in an enhanced tube having square-cut twisted tape insert. Energies, 12(2), 306, 2019 (Jan). DOI: 10.3390/en12020306
  109. Agung Tri Wijayanta, Indri Yaningsih, Muhammad Aziz, Takahiko Miyazaki, Shigeru Koyama. Double-sided delta-wing tape inserts to enhance convective heat transfer and fluid flow characteristics of a double-pipe heat exchanger. Applied Thermal Engineering, 145, 27-37, 2018 (Dec). DOI: 10.1016/j.applthermaleng.2018.09.009.
  110. Agung Tri Wijayanta, Muhammad Aziz, Keishi Kariya, Akio Miyara. Numerical study of heat transfer enhancement of internal flow using double-sided delta-winglet tape insert. Energies, 11(11), 3170, 2018 (Nov). DOI: 10.3390/en11113170
  111. Bentang Arief Budiman, Fauzan Adziman, Poetro Lebdo Sambegoro, Ignatius Pulung Nurprasetio, Rizky Ilhamsyah, Muhammad Aziz. The role of interfacial rigidity to crack propagation path in fiber reinforced polymer composite. Fibers and Polymers, 19(9), 1980-1988, 2018 (Sep). DOI: 10.1007/s12221-018-8194-z.
  112. Chandra Wahyu Purnomo, Endhy Kesuma, Indra Perdana, Muhammad Aziz. Lithium recovery from spent Li-ion batteries using coconut shell activated carbon. Waste Management, 79, 454-461, 2018 (Sep). DOI: 10.1016/j.wasman.2018.08.017.
  113. Asep Bayu Dani Nandiyanto, Riezqa Andika, Muhammad Aziz, Lala Septem Riza. Working volume and milling time on the product size/morphology, product yield, and electricity consumption in the ball-milling process of organic material. Indonesian Journal of Science & Technology, 3(2), 1-13, 2018 (Sep). DOI: 10.17509/ijost.v3i2.12752.
  114. Farid Triawan, Asep Bayu Dani Nandiyanto, Ade Gafar Abdullah, Muhammad Aziz. Plasma nitriding time on the hardness and crystal structure/phase of SUS403 and SCS6 martensitic stainless steels: an analytical study. Journal of Engineering Science and Technology, 13(8), 2338-2347, 2018 (Aug).
  115. Ignatius Pulung Nurprasetio, Bentang Arief Budiman, Muhammad Aziz. Evaluation of bonding strength and fracture criterion for aluminum alloy – woven composite adhesive joint based on cohesive zone model. International Journal of Adhesion and Adhesives, 85, 193-201, 2018 (Oct). DOI: 10.1016/j.ijadhadh.2018.06.011.
  116. Muhammad Aziz, Muhammad Huda, Asep Bayu Dani Nandiyanto, Ade Gafar Abdullah. Opportunity of frequency regulation using electric vehicles in Denmark. Journal of Engineering Science and Technology, 13(6), 1700-1712, 2018 (Jun).
  117. Budi Kristiawan, Budi Santoso, Agung Tri Wijayanta, Muhammad Aziz, Takahiko Miyazaki. Heat transfer enhancement of TiO2/water nanofluid at laminar and turbulent flows: A numerical approach for evaluating effect of nanoparticle loadings. Energies, 11(6), 1584, 2018 (Jun). DOI: 10.3390/en11061584.
  118. Firman Bagja Juangsa, Lukman Adi Prananto, Zahrul Mufrodi, Arief Budiman, Takuya Oda, Muhammad Aziz.Highly energy-efficient combination of dehydrogenation of methylcyclohexane and hydrogen-based power generation. Applied Energy, 226, 31-38, 2018 (Sep). DOI: 10.1016/j.apenergy.2018.05.110.
  119. Asep Bayu Dani Nandiyanto, Fajar Nugraha Asyahidda, Ari Arifin Danuwijaya, Ade Gafar Abdullah, Nia Amelia, Muhammad Nur Hudha, Muhammad Aziz. Teaching “nanotechnology” for elementary students with deaf and hard of hearing. Journal of Engineering Science and Technology, 13(5), 1352-1363, 2018 (May).
  120. Faizal Arifurrahman, Bentang Arief Budiman, Muhammad Aziz. On the lightweight structural design for electric road and railway vehicles using fiber reinforced polymer composites – a review. International Journal of Sustainable Transportation Technology, 1(1), 21-29, 2018 (Apr). DOI: 10.31427/IJSTT.2018.1.1.4.
  121. Diana Hernawati, Mohamad Amin, Mimien Henie Irawati, Sri Endah Indriwati, Muhammad Aziz. Integration of project activity to enhance the scientific process skill and self-efficacy in zoology of vertebrate teaching and learning. EURASIA Journal of Mathematics, Science and Technology Education, 14(6), 2475-2485, 2018 (Jun). DOI: 10.29333/ejmste/89940.
  122. Arif Darmawan, Anggoro Cahyo Fitrianto, Muhammad Aziz, Koji Tokimatsu. Integrated system of rice production and electricity generation. Applied Energy, 220, 672-680, 2018 (Jun). DOI:  10.1016/j.apenergy.2018.03.098.
  123. Arif Darmawan, Muhammad W. Ajiwibowo, Kunio Yoshikawa, Muhammad Aziz, Koji Tokimatsu. Energy-efficient recovery of black liquor through gasification and syngas chemical looping. Applied Energy, 219, 290–298, 2018 (Jun). DOI: 10.1016/j.apenergy.2018.03.033.
  124. Lukman Adi Prananto, Ilman Nuran Zaini, Bobby Irawan Mahendranata, Firman Bagja Juangsa, Muhammad Aziz, Tubagus Ahmad Fauzi Soelaiman. Use of the Kalina cycle as a bottoming cycle in a geothermal power plant: Case study of the Wayang Windu geothermal power plant. Applied Thermal Engineering, 132, 686-696, 2018 (Mar). DOI: 10.1016/j.applthermaleng.2018.01.003.
  125. Lukman Adi Prananto, Firman Bagja Juangsa, Riza Mochamad Iqbal, Muhammad Aziz, Tubagus Ahmad Fauzi Soelaiman. Dry steam cycle application for excess steam utilization: Kamojang geothermal power plant case study. Renewable Energy, 117, 157-165, 2018 (Mar). DOI: 10.1016/j.renene.2017.10.029.
  126. Sunarno, Rochmadi, Panut Mulyono, Muhammad Aziz, Arief Budiman. Kinetic study of catalytic cracking of bio-oil over silica-alumina catalyst. BioResources, 13(1), 1917-1929, 2018 (Jan). 
  127. Noviany, Arief Nurhidayat, Sutopo Hadi, Tati Suhartati, Muhammad Aziz, Neny Purwitasari, Iman Subasman. Sesbagrandiflorain A and B: Isolation of two new 2-arylbenzofurans from the stem bark of Sesbania grandiflora. Natural Product Research, 32(21), 2558-2564, 2018 (Jan). DOI: 10.1080/14786419.2018.1425858.
  128. Takuya Oda, Muhammad Aziz, Takashi Mitani, Yoko Watanabe, Takao Kashiwagi. Mitigation of congestion related to quick charging of electric vehicles based on waiting time and cost–benefit analyses: A japanese case study. Sustainable Cities and Society, 36, 99-106, 2018 (Jan). DOI: 10.1016/j.scs.2017.10.024.
  129. Bentang Arief Budiman, Firman Bagja Juangsa, Muhammad Aziz, Ignatius Pulung Nurprasetio, Ilman Nuran Zaini. Experimental verification of interfacial strength effect on the mechanical properties of carbon fiber-epoxy composite. International Journal on Advanced Science, Engineering and Information Technology, 7(6), 2226-2231, 2017 (Dec). DOI:  10.18517/ijaseit.7.6.2781.
  130. Firman Bagja Juangsa, Bentang Arief Budiman, Muhammad Aziz, Tubagus Ahmad Fauzi Soelaiman. Design of an airborne vertical axis wind turbine for low electrical power demands. International Journal of Energy and Environmental Engineering, 8, 293-301, 2017 (Dec). DOI: 10.1007/s40095-017-0247-3.
  131. Ilman Nuran Zaini, Annisa Nurdiawati, Muhammad Aziz. Cogeneration of power and H2 by steam gasification and syngas chemical looping. Applied Energy, 207, 134-145, 2017 (Dec). DOI: 10.1016/j.apenergy.2017.06.071.
  132. Baskoro Lokahita, Muhammad Aziz, Fumitake Takahashi, Kunio Yoshikawa. Energy and resource recovery from Tetra Pak waste using hydrothermal treatment. Applied Energy, 207, 107-113, 2017 (Dec). DOI: 10.​1016/​j.​apenergy.​2017.​05.​141.
  133. Takuya Oda, Takafumi Maekawa, Yoko Watanabe, Muhammad Aziz, Takao Kashiwagi. Influence of congestion at quick charging stations on charging electricity of electric vehicles. Journal of Japan Society of Energy and Resources, 38, 19-27, 2017 (Nov). (in Japanese)
  134. Takashi Mitani, Takuya Oda, Muhammad Aziz, Atsuki Uetsuji, Yoko Watanabe, Takao Kashiwagi. Economic analysis for hydrogen application by surplus power. Journal of Japan Society of Energy and Resources, 38, 9-18, 2017 (Nov). (in Japanese)
  135. Muhammad Aziz, Aditya Putranto, Muhammad Kunta Biddinika, Agung Tri Wijayanta. Energy-saving combination of N2 production, NH3 synthesis and power generation. International Journal of Hydrogen Energy, 42, 27174-27183, 2017 (Nov). DOI: 10.1016/j.ijhydene.2017.09.079. (corresponding author)
  136. Arif Darmawan, Flabianus Hardi, Kunio Yoshikawa, Muhammad Aziz, Koji Tokimatsu. Enhanced process integration of black liquor evaporation, gasification and combined cycle. Applied Energy, 204, 1035-1042, 2017 (Oct). DOI: 10.1016/j.apenergy.2017.05.058.
  137. Arif Darmawan, Dwika Budianto, Muhammad Aziz, Koji Tokimatsu. Retrofitting existing coal power plants through cofiring with hydrothermally-treated empty fruit bunch and a novel integrated system. Applied Energy, 204, 1138-1147, 2017 (Oct). DOI: 10.1016/j.apenergy.2017.03.122.
  138. Gea Fardias Mumin, Pandji Prawisudha, Ilman Nuran Zaini, Muhammad Aziz, Ari Darmawan Pasek. Municipal solid waste processing and separation employing wet torrefaction for alternative fuel production and aluminum reclaim. Waste Management, 67, 106-120, 2017 (Sep). DOI: 10.1016/j.wasman.2017.05.022.
  139. Ilman Nuran Zaini, Srikandi Novianti, Anissa Nurdiawati, Adrian Rizqi Irhamna, Muhammad Aziz, Kunio Yoshikawa. Investigation on the physical characteristics of washed hydrochar pellets made from empty fruit bunch. Fuel Processing Technology, 160, 109-120, 2017 (Jun). DOI: 10.1016/j.fuproc.2017.02.020.
  140. Takashi Mitani, Muhammad Aziz, Takuya Oda, Atsuki Uetsuji, Yoko Watanabe, Takao Kashiwagi. Annual assessment of large-scale introduction of renewable energy: Modeling of unit commitment schedule for thermal power generators and pumped storages. Energies, 10(6), 738, 2017 (Jun). DOI: 10.3390/en10060738.
  141. Muhammad Aziz, Tedi Kurniawan, Takuya Oda, Takao Kashiwagi. Advanced power generation utilizing biomass wastes from palm oil mills. Applied Thermal Engineering, 114, 1378-1386, 2017 (Mar). DOI: 10.1016/j.applthermaleng.2016.11.031.
  142. Muhammad Aziz, Ilman Nuran Zaini, Takuya Oda, Atsushi Morihara, Takao Kashiwagi. Energy conservative brown coal conversion to hydrogen and power based on enhanced process integration: Integrated drying, coal direct chemical looping, combined cycle and hydrogenation. International Journal of Hydrogen Energy, 42, 2904-2913, 2017 (Feb). DOI: 10.1016/j.ijhydene.2016.10.060.
  143. Takuya Oda, Muhammad Aziz, Takashi Mitani, Yoko Watanabe, Takao Kashiwagi. Actual congestion and effect of charger addition in the quick charger station: Case study based on the records of expressway. Electrical Engineering in Japan, 198, 11-18, 2017 (Jan). DOI: 10.1002/eej.22906.
  144. Muhammad Aziz, Firman Bagja Juangsa, Winarto Kurniawan, Bentang Arief Budiman. Clean co-production of H2 and power from low rank coal. Energy, 116, 489-497, 2016 (Dec). DOI: 10.1016/j.energy.2016.09.135.
  145. Takuya Oda, Muhammad Aziz, Takashi Mitani, Yoko Watanabe, Takao Kashiwagi. Number of quick charge station and quick charger for electric vehicle – Case study considering the traffic density of the road type –. Journal of Japan Society of Energy and Resources, 37, 7-12, 2016 (Nov). (in Japanese).
  146. Dwika Budianto, Muhammad Aziz, Cahyadi, Takuya Oda. Numerical investigation of co-firing of palm kernel shell into pulverized coal combustion. Journal of the Japan Institute of Energy, 95(8), 605-614, 2016 (Aug). DOI: 10.3775/jie.95.605.
  147. Bentang Arief Budiman, Djoko Suharto, Indra Djodikusumo, Muhammad Aziz, Firman Bagja Juangsa. Fail-safe design and analysis for guide vane of hydro turbine. Advances in Mechanical Engineering, 8(7), 1-8, 2016 (Jul). DOI:  10.1177/1687814016658178.
  148. Muhammad Aziz. Power generation from algae employing enhanced process integration technology. Chemical Engineering Research and Design, 109, 297-306, 2016 (May). DOI: 10.1016/j.cherd.2016.02.002.
  149. Muhammad Aziz, Takuya Oda, Masakazu Ito. Battery assisted charging system for simultaneous charging of electric vehicles. Energy, 100, 82-90, 2016 (Apr). DOI: 10.1016/j.energy.2016.01.069.
  150. Muhammad Aziz, Dwika Budianto, Takuya Oda. Computational fluid dynamic analysis of co-firing of palm kernel shell and coal. Energies, 9(3), 137(pp. 1-15), 2016 (Mar). DOI: 10.3390/en9030137.
  151. Takashi Mitani, Takuya Oda, Muhammad Aziz, Takao Kashiwagi. A study on estimation method for customer’s reaction towards other photovoltaic installations. Journal of Japan Society of Energy and Resources, 37(2), 9-16, 2016 (Feb). (in Japanese).
  152. Takuya Oda, Muhammad Aziz, Takashi Mitani, Takao Kashiwagi. Actual congestion and effect of charger addition in the quick charger station —Case study based on the records of expressway—. IEEJ Transactions on Power and Energy, 136(2), 198-204, 2016 (Feb). DOI: 10.1541/ieejpes.136.198 (in Japanese).
  153. Muhammad Aziz. Integrated hydrogen production and power generation from microalgae. International Journal of Hydrogen Energy,41(1), 104-112, 2016 (Jan). DOI: 10.1016/j.ijhydene.2015.10.115.
  154. Bayu Prabowo, Muhammad Aziz, Kentaro Umeki, Herri Susanto, Mi Yan, Kunio Yoshikawa. CO2-recycling biomass gasification system for highly efficient and carbon-negative power generation. Applied Energy 158, 97-106, 2015 (Nov). DOI: 10.1016/j.apenergy.2015.08.060.
  155. Muhammad Aziz, Takuya Oda, Takashi Mitani, Yoko Watanabe, Takao Kashiwagi. Utilization of electric vehicles and their used batteries for peak-load shifting. Energies 8(5), 3720-3738, 2015 (May). DOI: 10.3390/en8053720.
  156. Muhammad Aziz, Oda Takuya, Kashiwagi Takao. Innovative steam drying of empty fruit bunch with high energy efficiency. Drying Technology 33(4), 395-405, 2015 (Apr). DOI: 10.1080/07373937.2014.970257.
  157. Muhammad Aziz, Takuya Oda, Takao Kashiwagi. Design and analysis of energy-efficient integrated crude palm oil and palm kernel oil processes. Journal of the Japan Institute of Energy 94(1), 143-150, 2015 (Jan). DOI: 10.3775/jie.94.143.
  158. Muhammad Aziz. Integrated supercritical water gasification and a combined cycle for microalgal utilization. Energy Conversion and Management 91, 140-148, 2015, DOI: 10.1016/j.enconman.2014.12.012.
  159. Muhammad Aziz, Pandji Prawisudha, Bayu Prabowo, Bentang Arief Budiman. Integration of energy-efficient empty fruit bunch drying with gasification/combined cycle systems. Applied Energy 139, 188-195, 2015, DOI: 10.1016/j.apenergy.2014.11.038.
  160. Muhammad Aziz, Takuya Oda, Takao Kashiwagi. Advanced energy harvesting from algae—Innovative integration of drying, gasification and combined cycle. Energies 7(12), 8217-8235, 2014, DOI: 10.3390/en7128217.
  161. Muhammad Aziz, Takuya Oda, Takao Kashiwagi. Energy-efficient low rank coal drying based on enhanced vapor recompression technology. Drying Technology 32, 1621-1631, 2014, DOI: 10.1080/07373937.2014.915219.
  162. Muhammad Aziz, Takuya Oda, Takao Kashiwagi. Integration of energy-efficient drying in microalgae utilization based on enhanced process integration. Energy 70, 307-316, 2014, DOI: 10.1016/j.energy.2014.03.126 (featured as Key Scientific Articles from Renewable Energy Global Innovations)
  163. Yuping Liu, Muhammad Aziz, Yasuki Kansha, Atsushi Tsutsumi. Application of the self-heat recuperation technology for energy saving in biomass drying system. Fuel Processing Technology 117, 66-74, 2014, DOI: 10.1016/j.fuproc.2013.02.007.
  164. Yui Kotani, Muhammad Aziz, Yasuki Kansha, Chihiro Fushimi, Atsushi Tsutsumi. Magnetocaloric heat circulator based on self-heat recuperation technology. Chemical Engineering Science 101, 5-12, 2013, DOI: 10.1016/j.ces.2013.05.064.
  165. Yuping Liu, Muhammad Aziz, Yasuki Kansha, Atsushi Tsutsumi. A novel exergy recuperative drying module and its application for energy-saving drying with superheated steam. Chemical Engineering Science 100, 392-401, 2013, DOI: 10.1016/j.ces.2013.01.044.
  166. Muhammad Aziz, Takuya Oda, Takao Kashiwagi. Enhanced high energy efficient steam drying of algae. Applied Energy 109, 163–170, 2013, DOI: 10.1016/j.apenergy.2013.04.004.
  167. Yasuki Kansha, Muhammad Aziz, Akira Kishimoto, Atsushi Tsutsumi. Evaluation of a self-heat recuperative thermal process based on thermodynamic irreversibility and exergy. Journal of Chemical Engineering of Japan 46(1), 87-91, 2013, DOI: 10.1252/jcej.12we084.
  168. Yuping Liu, Muhammad Aziz, Chihiro Fushimi, Yasuki Kansha, Kazuhiro Mochidzuki, Shozo Kaneko, Atsushi Tsutsumi, Katsuhiko Yokohama, Kazuyuki Myoyo, Koji Oura, Keisuke Matsuo, Shogo Sawa, Katsuhiko Shinoda. Exergy analysis of biomass drying based on self-heat recuperation technology and its application for industry: a simulation and experimental study. Industrial & Engineering Chemistry Research 51, 9997−10007, 2012, DOI: 10.1021/ie2027298.
  169. Muhammad Aziz, Yasuki Kansha, Akira Kishimoto, Yui Kotani, Yuping Liu, Atsushi Tsutsumi. Advanced energy saving in low rank coal drying based on self-heat recuperation technology. Fuel Processing Technology 104, 16-22, 2012, DOI: 10.1016/j.fuproc.2012.06.020.
  170. Muhammad Aziz, Osamu Ohnishi, Hiromichi Onikura. Advanced burr-free hole machining using newly developed micro compound tool. International Journal of Precision Engineering and Manufacturing 13(6), 947-953, 2012, DOI: 10.1007/s12541-012-0123-2.
  171. Muhammad Aziz, Osamu Ohnishi, Hiromichi Onikura. Innovative micro hole machining with minimum burr formation by the use of newly developed micro compound tool. Journal of Manufacturing Process 14, 224-232, 2012, DOI: 10.1016/j.jmapro.2011.12.006.
  172. Chihiro Fushimi, Yasuki Kansha, Muhammad Aziz, Yuping Liu, Kazuhiro Mochidzuki, Shozo Kaneko, Atsushi Tsutsumi. Energy-efficient biomass drying based on self-heat recuperation technology. Separation Technology 41(4), 29-34, 2011 (in Japanese).
  173. Muhammad Aziz, Osamu Ohnishi, Hiromichi Onikura. Novel micro deep drilling using micro long flat drill with ultrasonic vibration. Precision Engineering 36(1), 168-174, 2012, DOI: 10.1016/j.precisioneng.2011.07.010.
  174. Muhammad Aziz, Yasuki Kansha, Atsushi Tsutsumi. Self-heat recuperative fluidized bed drying of brown coal. Chemical Engineering and Processing: Process Intensification 50(9), 944-951, 2011, DOI: 10.1016/j.cep.2011.07.005.
  175. Muhammad Aziz, Chihiro Fushimi, Yasuki Kansha, Kazuhiro Mochidzuki, Shozo Kaneko, Atsushi Tsutsumi, Keigo Matsumoto, Katsuhiko Yokohama, Kenichiro Kosaka, Noboru Kawamoto, Koji Oura, Yoshiki Yamaguchi, Masaaki Kinoshita. Innovative energy efficient biomass drying based on self-heat recuperation technology. Chemical Engineering & Technology 34(7), 1095-1103, 2011, DOI: 10.1002/ceat.201100065.
  176. Chihiro Fushimi, Yasuki Kansha, Muhammad Aziz, Kazuhiro Mochidzuki, Shozo Kaneko, Atsushi Tsutsumi, Keigo Matsumoto, Katsuhiko Yokohama, Kenichiro Kosaka, Noboru Kawamoto, Koji Oura, Yoshiki Yamaguchi, Masaaki Kinoshita. Novel drying process based on self-heat recuperation technology. Drying Technology 29, 105-110, 2010, DOI: 10.1080/07373937.2010.482719.
  177. Osamu Ohnishi, Hiromichi Onikura, Toshihiko Eguchi, Muhammad Aziz, Toshiro Doi, Syuhei Kurokawa. Improvement in drilling performance of micro compound tool. Key Engineering Materials 447-448, 96-100, 2010, DOI: 10.4028/www.scientific.net/KEM.447-448.96.
  178. Osamu Ohnishi, Hiromichi Onikura, Seung-Ki Min, Muhammad Aziz, Sho Tsuruoka. Effect of ultrasonic vibration on micro grooving. Memoirs of the Faculty of Engineering, Kyushu University, 68(1), 1-9, 2008.
  179. Osamu Ohnishi, Hiromichi Onikura, Seung-Ki Min, Muhammad Aziz, Sho Tsuruoka. Characteristics of grooving by micro end mills with various tool shapes and approach to their optimal shape. Memoirs of the Faculty of Engineering, Kyushu University 67(4), 143-151, 2007.

Books and Book Chapters 著書(編書、本の章)

  1. Metha Islameka, Bentang Arief Budiman, Firman Bagja Juangsa, Muhammad Aziz. Energy Management Systems for Battery Electric Vehicles. In: Emerging Trends in Energy Storage Systems and Industrial Applications (Editors: Prabhansu, Nayar Kumar), chapter 5, Elsevier, London, pp. 113–150, 2023 (Jan). DOI: 10.1016/B978-0-323-90521-3.00006-5, ISBN: 978-0-323-90521-3.
  2. Mohan Kolhe, Aziz Muhammad, Abdel El Kharbachi, Tri Yogi Yuwono. Recent Advances in Renewable Energy Systems, Selected Proceedings of ICOME 2021, Lecture Series in Electrical Engineering 876. Springer, Singapore, 2022 (Feb). ISB: 978-981-19-1580-2, 978-981-19-1581-9 (e-Book), DOI: 10.1007/978-981-19-1581-9.
  3. Arif Darmawan, Muhammad Aziz. Innovative Energy Conversion from Biomass Waste. Elsevier, Amsterdam, 2022 (in press). ISBN: 978-0-323-85477-1 (Editor and contributor)
  4. Luigi Cocco, Muhammad Aziz. Advanced Applications of Hydrogen and Engineering Systems in the Automotive Industry, 2021 (Apr), IntechOpen, DOI: 10.5772/intechopen.91571, ISBN: 978-1-83968-298-8, Print ISBN: 978-1-83968-297-1, eBook (PDF) ISBN: 978-1-83968-299-5.(Editor)
  5. Muhammad Aziz, Firman Bagja Juangsa. Dry steam power plant: Thermodynamic analysis and system improvement. In: Thermodynamic Analysis and Optimization of Geothermal Power Plants (Editors: Can Ö. Çolpan, Mehmet Akif Ezan, Onder Kizilkan), chapter 7, pp. 97-115, Elsevier, Amsterdam, Netherlands, 2021 (Feb). DOI: 10.1016/B978-0-12-821037-6.00015-9, ISBN: 978-0-12-821037-6
  6. Muhammad Aziz, Arif Darmawan, Muhammad W. Ajiwibowo. Advanced integrated-systems for hydrogen production and storage from low-rank fuels. In: Towards Sustainable Chemical Processes (Editors: Jinzheng Ren, Yufei Wang, Chang He), chapter 5, pp. 115-146, Elsevier, Amsterdam, Netherlands, 2020 (Jul). DOI: 10.1016/B978-0-12-818376-2.00005-3, ISBN: 9780128183762, eBook ISBN: 9780128189344.
  7. Muhammad Aziz. Exergy and Its Application – Toward Green Energy Production and Sustainable Environment, IntechOpen, 2019 (Dec). DOI: 10.5772/intechopen.77461, ISBN: 978-1-78984-675-1, Print ISBN: 978-1-78984-674-4, eBook (PDF) ISBN: 978-1-78985-353-7 (Book editor)
  8. Muhammad W. Ajiwibowo, Arif Darmawan, Muhammad Aziz. Chemical looping combustion power generation system for a power-to-gas scheme. Exergy and Its Application – Toward Green Energy Production and Sustainable Environment (Editor: Muhammad Aziz), InTech, in press.
  9. Muhammad Aziz. Integrated electric vehicle to small-scale energy management system. Smart Cities, Green Technologies, and Intelligent Transport Systems. Book Series: Communications in Computer and Information Science, Vol. 921 (Editors: Brian Donnellan, Cornel Klein, Markus Helfert, Oleg Gusikhin, António Pascoal), pp. 94-107, Springer, 2019 (Jan). DOI: 10.1007/978-3-030-02907-4_5, ISBN: 978-3-030-02907-4, Print-ISBN: 978-3-030-02906-7.
  10. Lukman Adi Prananto, Muhammad Aziz. Integrated gasification systems for power and hydrogen production. Gasification (Editor: Yongseung Yun). Chapter 13, pp. 257-276, InTech, 2018 (Jul). DOI: 10.5772/intechopen.71841, ISBN 978-953-51-5838-7.
  11. Arif Darmawan, Dwika Budianto, Koji Tokimatsu, Muhammad Aziz. Analysis of biomass wastes cofiring into existing coal-fired power plant using computational fluid dynamics. Computational Fluid Dynamics – Basic Instruments and Applications in Science (Editor: Adela Ionescu). Chapter 9, pp. 217-236, InTech, 2018 (Feb). DOI: 10.5772/intechopen.68688, ISBN 978-953-51-3791-7, Print ISBN: 978-953-51-3790-0.
  12. Muhammad Aziz, Takuya Oda. Advanced battery-assisted quick charger for electric vehicles. Behaviour of Lithium-Ion Batteries in Electric Vehicles. Green Energy and Technology (Editors: Gianfranco Pistoia, Boryann Liaw), Chapter 9, pp. 201-224. Springer, Cham, 2018 (Feb). DOI: 10.1007/978-3-319-69950-9_9, ISBN: 978-3-319-69949-3.
  13. Muhammad Aziz, Ilman Nuran Zaini. Hydrogen production from algal pathways. In: Encyclopedia of Sustainability Science and Technology, Second Edition (Editor: Robert A. Meyers), Springer, New York, pp. 1-28, 2017 (Oct). Online ISBN: 978-1-4939-2493-6, Print ISBN: 978-1-4939-2493-6. DOI: 10.1007/978-1-4939-2493-6_958-1.
  14. Muhammad Aziz. Advanced charging system for plug-in hybrid electric and electric vehicles. In: Hybrid Electric Vehicles (Editor: Teresa Donateo). InTech, pp. 63-81, 2017, DOI: 10.5772/intechopen.68287, ISBN 978-953-51-5418-1.
  15. Muhammad Aziz, Ilman Nuran Zaini. Algae to hydrogen: Novel energy-efficient co-production of hydrogen and power. In: Advances in Hydrogen Production and Storage, Vol. 1: Hydrogen Production Technologies (Editors: Mehmet Sankir, Nurdan Demirci Sankir), Wiley-Scrivener Publishing LLC, pp. 459-486, 2017, DOI: 10.1002/9781119283676.ch12, ISBN: 9781119283645.
  16. Muhammad Aziz, Load levelling utilizing electric vehicles and their used batteries. In: Modeling and Simulation for Electric Vehicle Applications (Editor: Mohamed Amine Fakhfakh), Chapter 6, pp. 125-147, InTech, 2016, DOI: 10.5772/64432, ISBN: 978-953-51-4819-7.
  17. Muhammad Aziz. Novel power generation from algae based on combination of exergy recovery and process integration technologies. In: Energy Harvesting: Technology, Methods and Applications (Editor: Renee Williams), Chapter 7, pp. 147-171, Nova Science Publisher, 2015, ISBN 978-1-63483-965-5.
  18. Muhammad Aziz, Takuya Oda, Takao Kashiwagi. Innovative process energy saving based on enhanced process integration. In: Advances in Engineering Research Vol. 10 (Editor: Victoria M. Petrova), Chapter 3, pp. 77-98, Nova Science Publisher, 2015, ISBN: 978-1-63482-784-3.
  19. Bayu Prabowo, Muhammad Aziz, Kentaro Umeki, Mi Yan, Herri Susanto, Kunio Yoshikawa. Utilization of rice husk in the CO2-recycling gasification system for the effective implementation of bioenergy with carbon capture and storage (BECCS) technology, In: Advances in CO2 Capture, Sequestration, and Conversion (Editors: Fangming Jin, Liang-Nian He, Yu Hang Hu), Chapter 13, pp. 323-340, ACS Publication, Washington DC, 2015. Chapter DOI 10.1021/bk-2015-1194.ch013, ISBN13: 9780841230880, eISBN: 9780841230859.
  20. Muhammad Aziz. Advanced Utilization of Algae for Power Generation, Scholar’s Press, 2015, Saarbrucken, Germany, ISBN: 978-3-639-76251-8.
  21. Muhammad Aziz. Innovative microalgae utilization with enhanced process integration. In: Energy Science and Technology, Eds.: U. C. Sharma, R. Prasad, S. Sivakumar, J.N. Govil, Vol. 7 (Bioenergy), Chapter 31, pp. 674-691, Studium Press LLC, Houston, 2014, ISBN of volume: 1-62699-061-9, ISBN of series: 1-62699-061-1.
  22. Muhammad Aziz. Advances in deep and burr-free micro holes machining with newly proposed micro tools. In: Machining: Operations, Technology and Management (Editor: J. Paulo Davim), Chapter 3, pp. 43-68, Nova Science Publishers, New York, 2012, ISBN: 978-162-10-0579-7.
  23. Yasuki Kansha, Akira Kishimoto, Muhammad Aziz, Atsushi Tsutsumi. Self-heat recuperation: Theory and applications. In: Heat Exchangers – Basic Design Applications (Editor: Jovan Mitrovic), InTech, Chapter 3, pp. 79-96, 2012, ISBN: 978-953-51-0278-6.

Patents 特許

  1. Muhammad Aziz, Yosuke Nakano. Belt drive. Application No. 2009-089253, Patent No. 2010-242789 (Japan)

Translations 翻訳

  1. Muhammad Aziz, Tedi Kurniawan, Takuya Oda, Takao Kashiwagi. Generación avanzada de energía a partir de la biomasa residual en plantas de beneficio de aceite de palma. (Carlos Arenas trad.). Palmas, 39(2), 27-46. Translated from: Muhammad Aziz, Tedi Kurniawan, Takuya Oda, Takao Kashiwagi. Advanced power generation utilizing biomass wastes from palm oil mills. Applied Thermal Engineering, 114, 1378-1386, 2017 (Mar). DOI: 10.1016/j.applthermaleng.2016.11.031.